GP-22

GP-22 是英力士苯领（INOES）生产的一款通用型中等流动性ABS。流动性好，热稳定性强，具有广泛的应用。

Terluran® GP-22 is an easy-flow, general purpose injection molding grade with high resistance to impact and heat distortion; intended for a wide range of applications, particularly in the housings sector.

特性：通用性佳，高抗冲，耐热变形。

FEATURES：Excellent colorability，Medium flow，Good impact resistance，Good heat distortion resistance，High quality surface finish and gloss，Great mechanical strength and rigidity.

用途：电器外壳，玩具，汽车零部件，家用和卫生器具，消费产品等

Applications:Injection molding,Appliance housings,Household and sanitary appliances,Toys,Automotive components,Consumer products.

订购电话：0769-87126376 17688193619

获取报价：联系塑能

分类： ABS 标签： ABS, 英力士苯领

描述
用户评价 (0)

英力士苯领(INEOS)

Terluran® ABS GP-22

物性表（TECHNICAL DATASHEET)

TERLURANⓇ GP-22 Acrylonitrile Butadiene Styrene (ABS)
DESCRIPTION
Terluran® GP-22 is an easy-flow, general purpose injection molding grade with high resistance to impact and heat distortion; intended for a wide range of applications, particularly in the housings sector.
FEATURES	APPLICATIONS
Excellent colorability Medium flow Good impact resistance Good heat distortion resistance High quality surface finish and gloss Great mechanical strength and rigidity	Injection molding Appliance housings Household and sanitary appliances Toys Automotive components Consumer products
Property, Test Condition	Standard	Unit	Values
TERLURANⓇ GP-22 Rheological Properties
Melt Volume Rate 220 °C/10 kg	ISO 1133	cm³/10 min	19
TERLURANⓇ GP-22 Mechanical Properties
Izod Notched Impact Strength, 23 °C	ISO 180/A	kJ/m²	26
Izod Notched Impact Strength, -30 °C	ISO 180/A	kJ/m²	8
Charpy Notched Impact Strength, 23° C	ISO 179/1eA	kJ/m²	22
Charpy Notched Impact Strength, -30 °C	ISO 179/1eA	kJ/m²	8
Charpy Unnotched, 23 °C	ISO 179/1eU	kJ/m²	180
Charpy Unnotched, -30 °C	ISO 179/1eU	kJ/m²	100
Tensile Stress at Yield, 23 °C	ISO 527	MPa	45
Tensile Strain at Yield, 23 °C	ISO 527	%	2.6
Tensile Modulus	ISO 527	MPa	2300
Nominal Strain at Break, 23 °C	ISO 527	%	10
Flexural Strength, 23 °C	ISO 178	MPa	65
Hardness, Ball Indentation	ISO 2039-1	MPa	97
TERLURANⓇ GP-22 Thermal Properties
Property, Test Condition	Standard	Unit	Values
Vicat Softening Temperature VST/B/50 (50N, 50 °C/h)	ISO 306	°C	96
Vicat Softening Temperature, VST/A/50 (10N, 50 °C/h)	ISO 306	°C	105
Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa)	ISO 75	°C	94
Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa)	ISO 75	°C	99
Coefficient of Linear Thermal Expansion	ISO 11359	10-6/°C	80 – 110
Thermal Conductivity	ISO 22007-4	W/(m K)	0.17
TERLURANⓇ GP-22 Electrical Properties
Dissipation Factor (100 Hz)	IEC 62631-2-1	10-4	48
Dissipation Factor (1 MHz)	IEC 62631-2-1	10-4	79
Relative Permittivity (100 Hz)	IEC 62631-2-1	–	2.9
Relative Permittivity (1 MHz)	IEC 62631-2-1	–	2.8
Volume Resistivity	IEC 62631-3-1	Ohm*m	>1013
Surface Resistivity	IEC 62631-3-1	Ohm	>1013
TERLURANⓇ GP-22 Optical Properties
Yellowness Index	DIN 6167	–	13
TERLURANⓇ GP-22Other Properties
Density	ISO 1183	kg/m³	1040
Water Absorption, Saturated at 23 °C	ISO 62	%	1
Moisture Absorption, Equilibrium 23 °C/50% RH	ISO 62	%	0.22
TERLURANⓇ GP-22 Processing
Linear Mold Shrinkage	ISO 294-4	%	0.4 – 0.7
Melt Temperature Range	ISO 294	°C	220 – 260
Mold Temperature Range	ISO 294	°C	30 – 80
Injection Velocity	ISO 294	mm/s	200
Drying Temperature	–	°C	80
Drying Time	–	h	2 – 4
Typical values for uncolored products
Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities. Please consult our local sales or technical representatives for details.
SUPPLY FORM Terluran® is delivered as spherical pellets. The bulk density of the pellets is from 0.55 to 0.65 g/cm³ . Standard Packaging unit: 25 kg PE-bag on palette, shrunk or wrapped with PE film or delivery in silo trucks. PE bags should not be stored outside. In dry areas with normal temperature control, Terluran pellets can be stored for relatively long periods of time without any change in mechanical properties. Under poor storage conditions, Terluran absorbs moisture, but this can be removed by drying.
PRODUCT SAFETY No adverse effects on the health of processing personnel have been observed if the products are correctly processed and the production areas are suitably ventilated. For styrene, acrylonitrile and 1,3-butadiene the maximum allowable workplace concentrations must be observed according to the pertaining national regulations. In Germany, the following limit values are valid (Oct. 2002): styrene, MAK-value:20 ml/m³ = 86 mg/m³; acrylonitrile, TRK-value: 3 ml/m³ = 7 mg/m³ and 1,3-butadiene, TRK-value: 5 ml/m³ = 11 mg/m³ . According to EU directive 67/548/EWG, Annex I and TRGS 905 (Oct. 2002), acrylonitrile and 1,3-butadiene are classified as carcinogenic, category 2 (´substances which should be regarded as if they are carcinogenic to man´) and 1 (substances known to be carcinogenic to man),respectively. Experience has shown that during appropriate processing of Terluran with suitable ventilation the values obtained are well below the limits mentioned above. TRGS 402 (Germany) can be used for determining and assessing the concentrations of hazardous substances in the air within working areas. Inhalation of gaseous degradation products, such as those which may arise on severe overheating of the material or during pumped evacuation, must be avoided. Further information can be found in our Terluran safety data sheets.
DISCLAIMER The above mentioned data are accurate to the best of our knowledge. They are based upon reputable labs and industry standard testing methods. These are only typical values and actual product specification may deviate at industrial range. Therefore, no data in this technical data sheet shall constitute a warranty or representation regarding product features, fitness of the product for a specific purpose or application or its processability. INEOS Styrolution disclaims all liability in connection therewith. The customer himself is required to verify whether or not the product is suitable for the further processing or application intended and whether or not the product complies with the relevant statutory requirements. Unless explicitly and individually otherwise agreed in writing, INEOS Styrolution’s sole and exclusive liability with respect to its products is set forth in INEOS Styrolution’s General Terms and Conditions for Sale.