沙比克天津石化
SABIC® PP （聚丙烯）
FPC70T
物性表（TECHNICAL DATASHEET）
| SABIC® PP FPC70T | |||
| POLYPROPYLENE IMPACT COPOLYMER REGION ASIA | |||
| DESCRIPTION | |||
| SABIC® PP FPC70T is part of the SABIC® PP FLOWPACT portfolio dedicated for thin wall packaging application. It offers very high melt flow rate along with good stiffness / impact balance enable very fast production speed while maintain good product integrity. It is designed to have good organoleptic performance to minimize potential taste and smell transfer to the food contents. SABIC® PP FPC70T also has very good impact resistance even at low temperature. This make it particularly suitable for the production of ice cream container, yoghurt tub, margarine container and other thin wall packaging for low temperature storage. | |||
| TYPICAL APPLICATIONS | |||
| SABIC® PP FPC70T is suitable for production of food contact thin wall packaging which includes packaging for frozen food, ambient food and dairy products (e.g. yoghurt, butter, cheese, etc.). | |||
| TYPICAL PROPERTY VALUES Revision 20211024 | |||
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
| POLYMER PROPERTIES | |||
| Melt Flow Rate (MFR) | |||
| @230°C&2.16kg | 70 | g/10 min | ISO 1133 |
| Density | |||
| @23°C | 905 | kg/m³ | ISO 1183 |
| MECHANICAL PROPERTIES | |||
| Tensile strength | |||
| @Yield | 25 | MPa | ISO 527-2 |
| Flexural Modulus | |||
| (1% Secant) | 1350 | MPa | ISO 178 |
| Charpy Impact Strength Notched | |||
| @23°C | 6.5 | kJ/m² | ISO 179-1 |
| @-20°C | 3 | kJ/m² | ISO 179-1 |
| Rockwell Hardness | |||
| R-Scale | 95 | – | ISO 2039-2 |
| THERMAL PROPERTIES | |||
| Heat deflection temperature | |||
| @455kPa | 105 | °C | ISO 75-2 |
| STORAGE AND HANDLING The resin should be stored in a manner to prevent a direct exposure to sunlight and / or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions that may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PE resin within 6 months after delivery. | |||
| DISCLAIMER | |||
| Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreedotherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THEPERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |
（免责声明：以上信息来自于网络资料，对其中数据如有疑问，请咨询原厂，以原厂说法为准，资料版权归属于原作者，仅善意用于同行间学习交流，如有侵权，请联系删除）
可提供的物性资料：
TDS（物性参数表）、COA（出厂检测报告）、MSDS，RoHS
Email:info@plaspowers.com
www.plaspowers.com
评价
目前还没有评价