6005

AXELERON™ CS 6005 NT CPD是美国陶氏(DOW)生产的一种高分子高密度聚乙烯绝缘化合物(“CPD”)。具有优异的机械性能和电性能,使其适合作为主要的介电材料。

AXELERON™️  CS 6005  NT  CPD  is  a  high-molecular  weight,density  polyethylene  insulation  compound(CPD”)with an excellent combination of mechanical and electrical  properties which  make  it well suited for  use as a primary dielectric.

特点:出色的机械性和电气性能。

Characteristics:Superior mechanical and electrical properties,Excellent dielectric properties

主要用途:基础电缆。

Applications:Primary dielectric.

联系方式:17688193619    0769-87126376

获取报价:联系塑能

 

分类: 标签: ,

美国陶氏(DOW)

LLDPE AXELERON™ CS 6005 NT CPD

物性表(TECHNICAL  DATASHEET)

AXELERON™️CS 6005 NT CPD
Low Density Polyethylene Solid Insulation Compound
Overview              AXELERON™️  CS 6005  NT  CPD  is  a  high-molecular  weight,density  polyethylene  insulation  compound(CPD”)with an excellent combination of mechanical and electrical  properties which  make  it well suited for  use as a primary dielectric.
Specifications
AXELERON™️CS 6005  NT CPD meets the following raw material specifications:
·ASTM D 1248 IA-5,Grades E4 and E5
·Federal LP-390C  I-L,Grade 3,Category 5
·MIL-C-17F,Amendment 1,Paragraph 3.5.2.1,Type A
AXELERON™️CS 6005 NT CPD PhysicalNominal Value(English)Nominal Value(SI)Test Method
Density0.920g/cm³0.920g/cm³ASTM D792
Melt Mass-Flow Rate(190℃/2.16kg)0.20g/10 min0.20g/10 minASTM D1238
Environmental Stress-Cracking Resistance
(ESCR)
100% lgepal,F20
>96.0hr>96.0hrASTM D1693
AXELERON™️CS 6005 NT CPD  MechanicalNominal Value(English)Nominal Value(SI)Test Method
Tensile Strength2200psi15.2MPaASTM D638
Tensile Elongation (Break)600%600%ASTM D638
ThermalNominal Value(English)Nominal Value(SI)Test Method
Brittleness Temperature<-130°F<-90.0ASTM D746
AXELERON™️CS 6005 NT CPD ElectricalNominal Value(English)Nominal Value( SI)Test Method
Volume Resistivity(23°F(-5℃))>1.0E+16ohms·cm>1.0E+16ohms·cmASTM D257
Dielectric Strength
0.125 in (3.18 mm),Method A(Short-Time)
550V/mil22kV/mmASTM D149
Dielectric Constant(1 MHz)2.282.28ASTM D1531
Dissipation Factor(1 MHz)2.0E-42.0E-4ASTM D1531
ExtrusionNominal Value(English)Nominal Value(SI)
Melt Temperature375 to 425°F191 to 218
Extrusion Notes
AXELERONs™️ CS 6005 NT CPD provides excellent surface finish and outstanding output rates over a broad range of conditions.For optimum  results,use  melt extrusion  temperatures  in  the  suggested  range  of  375  to  425°F(191  to  218℃).However,specific recommendations for  processing  conditions  can  be determined only when the  application  and type of processing equipment  are  known.
Notes
These are typical properties only and are not to be construed as specifications.Users should confirm results by their own tests.
 

 

Product Stewardship

The  Dow  Chemical  Company  and  its  subsidiaries(Dow)has  a  fundamental  concern  for  all  who  make,distribute,and  use  its  products,and for the  environment  in which we  live.This  concern  is the  basis for our Product  Stewardship  philosophy  by  which  we  assess  the  safety,health,and  environmental  information  on   our products and then take appropriate steps to protect employee and public health and our environment.

The success of our Product Stewardship program rests with each and every individual involved with Dow products-from   the initial   concept   and   research,to manufacture,use,sale,disposal,and   recycle   of   each product.

 

Customer Notice

Dow strongly encourages its customers to review both their manufacturing processes and their applications of Dow products from the standpoint of human health and environmental quality to ensure that Dow products are not used in ways for which they are not intended or tested.Dow personnel are available to answer your questions and to  provide  reasonable technical support.Dow  product  literature,including safety data sheets,should  be consulted  prior to  use of Dow  products.Current safety data sheets are  available from  Dow.
 

 

 

 

 

 

Medical Applications Policy

NOTICE REGARDING MEDICAL APPLICATION RESTRICTIONS:Dow will not knowingly sell or sample any  product  or  service(“Product)into  any  commercial  or  developmental  application  that  is  intended  for:

a.long-term  or  permanent  contact  with  internal  bodily fluids or tissues.”Long-term”is   contact   which
exceeds  72  continuous  hours;

b.use  in  cardiac  prosthetic  devices  regardless  of  the  length  of  time  involved(cardiac  prosthetic  devices”include,but  are  not  limited  to,pacemaker  leads  and devices,artificial  hearts,heart  valves,intra-aortic balloons  and  control  systems,and  ventricular  bypass-assisted  devices);

c.use  as  a  critical  component  in  medical  devices that  support  or sustain  human  life;or

d.use  specifically  by  pregnant women  or  in  applications  designed  specifically to  promote  or  interfere with human   reproduction.

Dow requests that customers considering use of Dow products in medical applications notify Dow so that appropriate  assessments  may  be  conducted.Dow  does  not  endorse  or  claim  suitability  of its  products for specific  medical  applications.It  is  the  responsibility  of the  medical  device  or  pharmaceutical  manufacturer to determine that the  Dow  product  is safe,lawful,and technically suitable for the  intended  use. DOW MAKES NO WARRANTIES,EXPRESS OR IMPLIED,CONCERNING THE SUITABILITY OF ANY DOW PRODUCT FOR USE IN MEDICAL APPLICATIONS.

 

 

 

 

 

 

Disclaimer

NOTICE:No freedom from infringement of any patent owned by Dow or others is to be inferred.Because use conditions and applicable laws may differ from one location to another and may change with time,the  Customer is responsible for determining whether products and the information in this document are appropriate for the Customer’s use and for ensuring that the Customer’s workplace and disposal practices are in compliance with applicable laws and other governmental enactments.Dow assumes no obligation or liability for the information in this document.

NO WARRANTIES ARE GIVEN;ALL IMPLIED WARRANTIES OF MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

NOTICE:if products   are   described as”experimental”   or   developmental:

(1)product  specifications  may  not  be  fully  determined;

(2) analysis of hazards and caution in handling and use are required;

(3)there is greater potential for Dow to change specifications and or  discontinue  production;and

(4)although  Dow may  from  time  to  time  provide  samples  of  such  products, Dow is not obligated to  supply  or  otherwise  commercialize  such  products  for any  use  or application whatsoever.

NOTICE:This  data  is  based  on  information  Dow  believes to  be  reliable,as  demonstrated  in  controlled laboratory  testing.They  are  offered in  good  faith,but  without  guarantee,as  conditions  and  method  of  use of Dow  products are  beyond  Dow’s control.Dow  recommends that the  prospective  user determine the suitability of these materials and suggestions before adopting them on a commercial scale.
To the best of our knowledge,the information contained herein is accurate and reliable as of the date of publication,however we do not assume any liability for the accuracy and completeness of such information.

(免责声明:以上数据采集自网络,数据仅供参考,如有疑问,请联系厂家以厂家说明为准,版权归属于原作者,本页面仅供同行学习交流,如有侵权,请联系删除)

查看更多聚乙烯(PE)


Email:info@plaspowers.com 
www.plaspowers.com
sister corporation:Sunengtag
Wechat: sunengpv

wechat_orcode

评价

目前还没有评价

成为第一个“6005” 的评价者

您的邮箱地址不会被公开。 必填项已用 * 标注

您不能复制此页面的内容