中沙石化
SABIC Ⓡ PP（聚丙烯）
511MK40T
物性表（TECHNICAL DATASHEET)
| SABIC® PP 511MK40T | |||
| POLYPROPYLENE IMPACT COPOLYMER REGION ASIA | |||
| DESCRIPTION | |||
| SABIC® PP 511MK40T is a high fluidity polypropylene impact copolymer with high stiffness and medium impact strength. It contains nucleating & antistatic agents. | |||
| TYPICAL APPLICATIONS | |||
| SABIC® PP 511MK40T can be used for home appliance parts, auto interiors & exteriors, thin-walled injection articles and compounding. | |||
| TYPICAL PROPERTY VALUES Revision 20200901 | |||
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
| POLYMER PROPERTIES | |||
| Melt Flow Rate (MFR) | |||
| @230°C&2.16kg | 29 | g/10 min | ISO 1133 |
| Density | |||
| @23°C | 905 | kg/m³ | ISO 1183 |
| MECHANICAL PROPERTIES | |||
| Tensile strength | |||
| @Yield | 25 | MPa | ISO 527-2 |
| Flexural Modulus | |||
| (1% Secant) | 1350 | MPa | ISO 178 |
| Charpy Impact Strength Notched | |||
| @23°C | 9 | kJ/m² | ISO 179-1 |
| @-20°C | 5 | kJ/m² | ISO 179-1 |
| Rockwell Hardness | |||
| R-scale | 95 | – | ISO 2039-2 |
| THERMAL PROPERTIES | |||
| Heat deflection temperature | |||
| @455kPa | 100 | °C | ISO 75-2 |
| STORAGE AND HANDLING | |||
| Polypropylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PP resin within 6 months after delivery. | |||
| DISCLAIMER | |||
| Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |||
（免责声明：资料来源于网络，仅供学习交流，如有疑问，请联系生产厂家，以厂家说法为准，本资料版权归属于原作者，如有侵权，请联系删除）
可以提供的资料：
物性表、加工建议参数、SDS、UL、ROHS、SVHC、环保证明、FDA、COA
Email:info@plaspowers.com
www.plaspowers.com
sister corporation:Sunengtag
Wechat: sunengpv
评价
目前还没有评价