2100
,

2100

ULTEM  2100是sabic（基础创新,原GE）生产的一款10%玻璃纤维增强，标准流动性，广泛应用的的PEI（聚醚酰亚胺），其符合ECO标准，通过UL94 V0认证，并获得5VA认证，该产品部分等级产品可通过ISCC+认证的可再生生物基解决方案。

长期耐热性：由于玻璃化转变温度高达217°C，因此在高温下具有出色的物理和机械性能稳定性。

强度和刚度：与现有替代产品中的其他无定形热塑性树脂相比，具有出色的机械性能，可预测的硬度和强度高达200°c。未填充的透明等级在强度上与含有不透明填料的其他热塑性树脂相当。

尺寸稳定性：在现有的尺寸最稳定的热塑性塑料中，在很宽的温度范围内提供可预测性。

环境应力和抗裂性：与大多数其他无定形热塑性塑料不同，ULTEM树脂在暴露于汽车和飞机流体、脂肪烃、酒精、酸和弱水溶液时，仍能保持强度并抵抗应力开裂。

可燃性、烟雾产生和毒性：大多数等级不含添加剂的固有阻燃性——异常难以点燃，极限氧指数(LOI)为47%,截面薄至0.41毫米，符合UL94 V0规格。根据NBS烟雾释放测试，产生的烟雾极低，燃烧产物的毒性不超过木材。

加工性能：可以挤出、热成型、挤出吹塑和注射成型，并且流动性允许使用常规注射成型设备达到0.2毫米厚的长流动长度。

订购电话：0769-87126376  17688193619

获取报价：联系塑能

分类： , 标签： , , , ,

聚醚酰亚胺PEI2100

物性表

 

ULTEM™ RESIN 2100
REGION ASIA
DESCRIPTION
Polyetherimide (PEI), 10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.

ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

INDUSTRYSUB INDUSTRY
AutomotiveHeavy Truck, Automotive Under the Hood, Aerospace, Motorcycle, Recreational/Specialty Vehicles
Building and ConstructionBuilding Component, Water Management
ConsumerConsumer Goods, Sport/Leisure, Personal Accessory, Home Appliances, Commercial Appliance, Furniture
Electrical and ElectronicsEnergy Management, Drone Solutions, Mobile Phone– Computer – Tablets, Circuit Boards/Additives,
Lighting, Printer Copier, Speaker – Earphone, WirelessCommunication
Hygiene and HealthcarePersonal and Professional Hygiene, Pharmaceutical Packaging and Drug Delivery, Surgical devices, General
Healthcare, Patient Testing
IndustrialElectrical, Material Handling, Textile, Eyewear
Mass TransportationRail
Packaging                                                                                                          Industrial Packaging
TYPICAL PROPERTY VALUESRevision20231109
PROPERTIESTYPICAL VALUESUNITSTEST METHODS
MECHANICAL
Tensile Stress, yld, Type I, 5 mm/min114    MPa      ASTM D638
Tensile Stress, brk, Type I, 5 mm/min115    MPa      ASTM D638
Tensile Strain, brk, Type I, 5 mm/min6    %      ASTM D638
Tensile Modulus, 5 mm/min4680    MPa      ASTM D638
Flexural Stress, brk, 2.6 mm/min, 100 mm span199    MPa      ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span5170    MPa      ASTM D790
Hardness, Rockwell M114    –      ASTM D785
IMPACT
Izod Impact, unnotched, 23°C480    J/m      ASTM D4812
Izod Impact, notched, 23°C53    J/m      ASTM D256
Izod Impact, Reverse Notched, 3.2 mm459    J/m      ASTM D256
THERMAL
Vicat Softening Temp, Rate B/50223    °C      ASTM D1525
HDT, 0.45 MPa, 6.4 mm, unannealed210    °C      ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed208    °C      ASTM D648
CTE, -20°C to 150°C, flow3.0E-05    1/°C      ASTM E831
Relative Temp Index, Elec170    °C      UL 746B
Relative Temp Index, Mech w/impact170    °C      UL 746B
Relative Temp Index, Mech w/o impact170    °C      UL 746B
PHYSICAL
Specific Gravity1.34    –      ASTM D792
Water Absorption, (23°C/24hrs)0.21    %      ASTM D570
PROPERTIESTYPICAL VALUESUNITSTEST METHODS
Water Absorption, (23°C/Saturated)1.2%ASTM D570
Mold Shrinkage, flow, 3.2 mm0.5 – 0.6%SABIC method
Melt Flow Rate, 337°C/6.6 kgf7g/10 minASTM D1238
ELECTRICAL
Volume Resistivity1.E+17Ω .cmASTM D257
Dielectric Strength, in oil, 1.6 mm27.5kV/mmASTM D149
Relative Permittivity, 1 kHz3.5–ASTM D150
Dissipation Factor, 1 kHz0.0014–ASTM D150
Dissipation Factor, 2450 MHz0.0046–ASTM D150
Comparative Tracking Index (UL) {PLC}4PLC CodeUL 746A
Hot-Wire Ignition (HWI), PLC 1≥3mmUL 746A
Hot-Wire Ignition (HWI), PLC 2≥1.5mmUL 746A
High Amp Arc Ignition (HAI), PLC 3≥1.5mmUL 746A
High Amp Arc Ignition (HAI), PLC 4≥3mmUL 746A
High Voltage Arc Track Rate {PLC}2PLC CodeUL 746A
Arc Resistance, Tungsten {PLC}6PLC CodeASTM D495
                                                                 (1)
FLAME CHARACTERISTICS
UL Yellow Card LinkE45587-236982––
UL Recognized, 94V-0 Flame Class Rating≥0.38mmUL 94
Oxygen Index (LOI)47%ASTM D2863
NBS Smoke Density, Flaming, Ds 4 min1.8–ASTM E662
UV-light, water exposure/immersionF1–UL 746C
INJECTION MOLDING
Drying Temperature150°C
Drying Time4 – 6Hrs
Drying Time (Cumulative)24Hrs
Maximum Moisture Content0.02%
Melt Temperature350 – 400°C
Nozzle Temperature345 – 400°C
Front – Zone 3 Temperature345 – 400°C
Middle – Zone 2 Temperature340 – 400°C
Rear – Zone 1 Temperature330 – 400°C
Mold Temperature135 – 165°C
Back Pressure0.3 – 0.7MPa
Screw Speed40 – 70rpm
Shot to Cylinder Size40 – 60%
Vent Depth                                                                                                       0.025 – 0.076                                                 mm
(1)  UL Ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed
otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller
materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is
intended, or should be construed, to grant any license under any patent or other intellectual property right.
© 2024 Copyright by SABIC. All rights reserved

（免责声明：本数据来源于网络资料，数值为典型数值非保证值仅供参考，如有疑问，请联系生产厂家，以厂家说明为准。本资料版权归属于原作者，仅供交流学习使用，如有侵权，请联系删除）

 

提供的资料：

TDS-ISO（国际标准测试物性表）、UL（黄卡）、SDS（安全资料表）、加工建议条件、COA(出厂合格产品检测报告)。

查看更多特种工程塑料

Email:info@plaspowers.com 
www.plaspowers.com
sister corporation:Sunengtag
Wechat: sunengpv

wechat_orcode

评价

目前还没有评价

成为第一个“2100” 的评价者

您的邮箱地址不会被公开。 必填项已用 * 标注

相关产品

您不能复制此页面的内容