FPC71T

FPC71T

FPC71T 是 SABIC跟中石化合资公司（中沙天津）生产的一款高溶指共聚聚丙烯（PP）

特点：耐低温，高溶指，良好的感官性。

CHARACTERISTICS：high melt flow rate，good stiffness， good impact resistance even at low temperature，have good organoleptic
performance to minimize potential taste and smell transfer to the food contents

应用范围：薄壁包装，酸奶桶，冰激凌盒，奶制品容器等各类食品容器。

APPLICATIONGS：SABIC® PP FPC70T is suitable for production of food contact thin wall packaging which includes packaging for frozen food, ambient food and dairy products (e.g. yoghurt, butter, cheese, etc.).

订购电话：0769-87126376   17688193619（微信同号）

获取报价：联系塑能

分类： 标签： , ,

沙比克天津石化

SABIC® PP （聚丙烯）

FPC71T

物性表（TECHNICAL  DATASHEET）

SABIC® PP FPC71T
POLYPROPYLENE IMPACT COPOLYMER FOR INJECTION MOLDING
REGION GREATER CHINA
DESCRIPTION
SABIC® PP FPC71T is a polypropylene impact copolymer designed for high speed injection molding process. It contains nucleating agent and antistatic agent. It has very high flowability, good stiffness and toughness balance, and good organoleptic performance. It is especially suitable for high speed production of thin wall packaging that require good low temperature toughness.
TYPICAL APPLICATIONS
SABIC® PP FPC71T is suitable for production of food contact thin wall packaging which includes packaging for frozen food, ambient food and dairy products (e.g. yoghurt, butter, cheese, etc.).
TYPICAL PROPERTY VALUES                                                                                                                        Revision 20250828
PROPERTIESTYPICAL VALUESUNITSTEST METHODS
MECHANICAL
Hardness, Rockwell R95–ISO 2039-2
IMPACT
Charpy Impact, notched, -20°C3.0kJ/m²ISO 179/2C
PHYSICAL
Melt Flow Rate, 230°C/2.16 kg70g/10 minISO 1133
Density0.905g/cm³ISO 1183
                                                                   (1)
MECHANICAL PROPERTIES
Tensile Strength at Yield25MPaISO 527-2
Flexural Modulus (1% Secant)1350MPaISO 178
Charpy Notched Impact Strength @ 23°C6.5kJ/m²ISO 179
THERMAL PROPERTIES
Heat Deflection Temperature (455 kPa)105°CISO 75
(1)  Based on injection molded specimens.

REGULATORY INFORMATION
SABIC® PP FPC71T is suitable for food contact application. Detailed information is provided in relevant documents / certificates and for additional specific information please contact SABIC local representative. DISCLAIMER: This product is not intended for and must not be used in any pharmaceutical / medical applications.

STORAGE AND HANDLING
The resin should be stored in a manner to prevent a direct exposure to sunlight and / or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions that may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PE resin within 6 months after delivery.

（免责声明：以上信息来自于网络资料，对其中数据如有疑问，请咨询原厂，以原厂说法为准，资料版权归属于原作者，仅善意用于同行间学习交流，如有侵权，请联系删除）

可提供的物性资料：

TDS（物性参数表）、COA（出厂检测报告）、MSDS，RoHS

查看更多聚丙烯（PP）

Email:info@plaspowers.com 
www.plaspowers.com

 

评价

目前还没有评价

成为第一个“FPC71T” 的评价者

您的邮箱地址不会被公开。 必填项已用 * 标注

相关产品

您不能复制此页面的内容